Network Lightning Protector Manufacturer
D-Vitec provides professional network lightning protectors designed to help safeguard Ethernet communication lines and PoE-powered network equipment from transient overvoltage caused by lightning-induced surges, switching events, and other electrical disturbances.
-
100M POE Network Lighting ProtectorThe HX-POE100E is a DIN-rail mountable/compact surge protection device designed to shield Fast Ethernet (10/100 Mbps) connections and Power over Ethernet (PoE) equipment from transient overvoltages,
-
Gigabit POE Network Lighting ProtectorGigabit POE Network Lightning Protector is an Ethernet surge protection device designed for Gigabit PoE networks. It uses multi-stage lightning and surge protection technology to protect data and
-
100M Network Lighting ProtectorThe HX-E100 100M Network Lightning Protector is an inline Ethernet surge protection device designed to clamp high-voltage electrical transients and direct excess voltage safely to the ground.
-
Gigabit Network Lighting ProtectorGigabit Network Lightning Protector is an Ethernet surge protection device designed for 10/100/1000Mbps networks. Using transient surge suppression technology, it protects network equipment from
-
Network Power 2-in-1 Surge ProtectorNetwork Power 2-in-1 Surge Protector is a combined AC power and Ethernet surge protection device designed for 10/100Mbps networks. It protects connected equipment from transient overvoltage on both
-
Gigabit Network Power 2-in-1 Surge ProtectorGigabit Network Power 2-in-1 Surge Protector is a Gigabit Ethernet and power surge protection device designed to protect network equipment from transient overvoltage. It supports 10/100/1000 Mbps
-
Network Power Data 3-in-1 Lighting ProtectorNetwork Power Data 3-in-1 Lightning Protector is a surge protection device designed for Ethernet, power, and data line protection. It supports 10/100Mbps network transmission while protecting
Technical Specifications
Network protection requirements vary according to network speed, PoE standard, installation environment, grounding conditions, and connected equipment. D-Vitec offers multiple protection configurations suitable for surveillance, industrial communication, and embedded networking applications.
|
Parameter |
Available Options / Typical Capabilities |
|
Product Category |
Network Lightning Protector / Ethernet Surge Protector |
|
Protection Type |
Ethernet Line Protection / PoE Surge Protection |
|
Supported Networks |
10/100 Mbps, Gigabit Ethernet (model dependent) |
|
Interface |
RJ45 |
|
PoE Compatibility |
Model-specific PoE pass-through configurations |
|
Installation |
Indoor / Outdoor application according to product design |
|
Protection Lines |
Ethernet signal, PoE power, or model-specific configurations |
|
Housing |
Industrial-grade enclosure depending on model |
|
Grounding |
External grounding according to installation requirements |
|
Operating Environment |
Model-specific temperature and humidity range |
|
Customization |
Logo, label, enclosure, packaging, and selected structural configurations |
Key Features
Ethernet Signal Protection
Designed to help reduce transient overvoltage entering Ethernet communication lines while maintaining normal network operation under standard conditions.
01
PoE Pass-Through Support
Selected models support PoE power transmission while simultaneously protecting compatible Ethernet communication lines, allowing both power and data to continue through the same network cable.
02
High-Speed Network Compatibility
Depending on the selected model, products support Fast Ethernet or Gigabit Ethernet applications for modern surveillance and communication systems.
03
Compact Installation
Compact housing allows installation close to protected equipment or network entry points where appropriate grounding is available.
04
Industrial Network Reliability
Suitable for commercial, industrial, surveillance, and outdoor communication systems where surge protection forms part of an overall network protection strategy.
05
IP Camera Systems:Protect Ethernet-connected IP cameras installed indoors or outdoors where network cables may be exposed to electrical disturbances.
PoE Surveillance Networks:Suitable for PoE switches, injectors, splitters, PTZ cameras, and other compatible PoE-powered surveillance equipment.
Wireless Access Points:Helps protect outdoor or rooftop wireless networking equipment connected through Ethernet cabling.
Industrial Ethernet:Suitable for industrial communication networks, production equipment, and automation systems requiring Ethernet surge protection.
Access Control Systems:Can be integrated into access control networks using Ethernet communication where surge protection is part of the system design.
Smart Buildings:Applicable to intelligent building infrastructure, security monitoring, and connected network equipment.
Transportation Infrastructure:Supports surveillance and communication equipment installed in transportation facilities and outdoor monitoring locations.

Multi-Stage Quality Control for Reliable Network Surge Protection
The effectiveness of a network lightning protector depends not only on its surge protection components, but also on PCB assembly quality, connector reliability, grounding continuity, housing integrity, and transmission stability. D-Vitec implements quality control throughout component inspection, production, electrical testing, and final inspection to support consistent product performance for surveillance, communication, and industrial networking applications.
Incoming Material Inspection:Electronic components, surge protection devices, PCBs, RJ45 connectors, housings, grounding terminals, and packaging materials are inspected before production according to applicable quality requirements.
PCB Assembly Inspection:Critical solder joints, circuit integrity, surge protection components, connector installation, and PCB assembly quality are checked during manufacturing to reduce assembly defects.
Electrical Performance Verification:Each applicable product undergoes functional testing to verify electrical continuity and basic operating performance according to the selected model.
Ethernet Transmission Testing:Network communication performance is verified under defined testing conditions to help ensure that compatible Ethernet signals can pass through the protector as intended.
PoE Compatibility Verification:For PoE-compatible models, applicable power transmission functions are verified according to the product specification. Compatibility should always be confirmed against the selected PoE standard and connected equipment.
Grounding Connection Inspection:Grounding terminals and related electrical connections are inspected to help ensure proper installation capability. Actual protection effectiveness depends on correct grounding during field installation.
Mechanical Structure Inspection:Product housings, connectors, fastening components, labels, and external appearance are checked to ensure consistency before packaging.
Aging & Reliability Testing:Selected products may undergo continuous operation or reliability evaluation according to project requirements to help identify potential early-stage failures.
Final Inspection & Traceability:Finished products are inspected for appearance, interface condition, electrical function, labeling, packaging, accessories, and quantity before shipment. Production records can be maintained to support quality traceability and after-sales service.

Network surge protection performance depends on product quality as well as installation practices, grounding quality, network architecture, and environmental conditions.
Applicable D-Vitec products may be covered by a warranty of up to two years according to the confirmed product model and commercial agreement.
Our after-sales support can assist with:
- Product selection questions
- Installation guidance
- Ethernet connectivity issues
- PoE compatibility questions
- Product identification
Factory Capability
Established in 2002, D-Vitec has accumulated extensive experience in video surveillance and related network accessory manufacturing. With more than 10 production lines and approximately 1,000 square meters of production space, we support international customers with standard products, OEM/ODM development, and bulk order fulfillment.
Packaging & Global Logistics
Network lightning protectors are packaged to help reduce the risk of mechanical damage during storage and transportation.
Individual Product Protection
Products are packed with suitable protective materials according to the product structure and shipment requirements.
Standard Export Cartons
Outer cartons are selected according to product dimensions, quantity, and transportation methods.
International Shipping
Orders can be shipped by express courier, air freight, sea freight, or other logistics methods according to customer requirements.
FAQ
We are one of the most professional network lighting protector manufacturers and suppliers in China, also support customized service with low price. We warmly welcome you to buy discount network lighting protector made in China here from our factory. Contact us for quotation.
100M Network Lighting Protector, network lighting protector, accessories