100M Network Lighting Protector

Send Inquiry
100M Network Lighting Protector
Details
The HX-E100 100M Network Lightning Protector is an inline Ethernet surge protection device designed to clamp high-voltage electrical transients and direct excess voltage safely to the ground.
Category
Network Lighting Protector
Share to
Description

Introduction

 

The HX-E100 100M Network Lightning Protector is an inline Ethernet surge protection device designed to clamp high-voltage electrical transients and direct excess voltage safely to the ground.

 

Product Specifications

 

Parameter

Specification

Surge Current

2.5kA (In), 5kA (Imax)

Response Time

<1ns

Protection Circuit

GDT + TVS multi-stage protection

Ethernet Speed

10/100Mbps Fast Ethernet

Interface

Dual RJ45 (Input/Output)

Insertion Loss

<0.5dB @ 100MHz

Dimensions

78 × 25 × 25mm

Operating Temperature

-40°C to +85°C

Grounding Resistance

<4Ω

Installation

Inline / DIN Rail Mount

Cable Support

Cat5e / Cat6 Ethernet

 

Applications & System Compatibility

 

LPR Cameras: Outdoor PTZ units, bullet cameras, and license plate readers mounted on exposed poles.

Retail & Commercial Infrastructure: Multi-floor edge routers, network switches, and building automation hubs.

Industrial Automation: Shop-floor PLC controllers, IoT gateways, and data acquisition systems operating in noisy electrical environments.

Elevated Field Hardware: Mast-mounted Wi-Fi Access Points (WAPs) and point-to-point wireless bridges exposed to direct lightning strikes.

 

Customization & OEM Solutions

 

  • Anodized aluminum alloy for harsh outdoor setups or UL94 V-0 flame-retardant ABS for cost-sensitive indoor deployments.
  • Custom ground wire lengths, terminal eyelet sizes, and shielded RJ45 connector configurations per project specifications.
  • Tailored nominal clamping voltages (Uc 5V–60V) and discharge capacities (In 5kA–10kA) for specialized data interfaces.
  • Neutral white boxes, customized retail blister packaging, or high-density bulk master cartons for OEM assembly lines.

 

Reliability Testing

 

Automated QC: Individual continuity checks, insertion loss verification (< 0. dB), and high-voltage withstand tests on every production unit.

IEC 61643-21 Surge Testing: Verified under standard 8/20μs current waveforms with up to 10kA peak discharge.

Signal Integrity Inspection: Verified with Fluke/Keysight analyzers to ensure stable 100Mbps data transmission.

Thermal Shock Endurance: Temperature cycling from -40°C to +85°C to prevent internal solder joint failures under extreme field conditions.

 

Commercial Terms

 

MOQ: Standard MOQ is 100 units; custom logo printing and specific part-number marking starting at 500 units.5-unit sample packages are available for engineering evaluation.

Lead Times: 10 business days for standard orders up to 1,000 units; 25 business days for 10,000+ units.

Shipping Terms (Incoterms): EXW, FOB Shenzhen, CIF, or DDP (duty-paid direct delivery to US/EU facilities).

Payment Terms: 30% T/T deposit with 70% balance before shipment; irrevocable L/C at sight accepted for orders above $50,000.

Warranty: 2-year factory warranty with free advance 1-to-1 replacement for verified field failures.

 

Factory Capabilities

 

  • Dual-sided automated SMT production lines equipped with 3D inline Automated Optical Inspection (AOI).
  • Daily production capacity exceeds 5,000 units to handle large-volume commercial orders without delays.
  • ISO 9001:2015 certified production workflows ensuring batch-to-batch consistency and full material traceability.
  • Fully compliant with CE, RoHS, and REACH directives; third-party test reports available upon request.

 

FAQ

 

Q: Does the anodized aluminum housing option offer better response time or protection than the UL94 V-0 ABS version?

A: Both housings deliver identical <1ns response time and surge ratings since the internal GDT+TVS circuit is unchanged; the aluminum option only adds better EMI shielding and physical durability.

Q: What is the default clamping voltage (Uc) for the standard off-the-shelf HX-E100?

A: The standard HX-E100 ships with a default Uc of 9V DC, suited for standard Ethernet data-line voltage levels; the 5V-60V range only applies to custom OEM orders for non-standard interfaces.

Q: How many surge events can this unit withstand before clamping performance degrades below rated protection levels?

A: The GDT+TVS stage is rated for a minimum of 20 discharge events at the full 5kA Imax rating, based on accelerated IEC 61643-21 repeated-surge testing.

Q: What type of projects typically use the HX-E100 Ethernet lightning protector?

A: The HX-E100 is commonly deployed in outdoor surveillance systems, traffic monitoring equipment, industrial Ethernet networks, and wireless communication sites where Ethernet cables are exposed to surge risks.

Q: What happens if a batch fails high-voltage withstand or continuity testing after arrival at the destination port?

A: Buyers must submit a claim with test evidence within 15 days of port arrival, after which a credit note or free replacement is issued within 10 business days upon verification.

Hot Tags: 100m network lighting protector, China 100m network lighting protector manufacturers, suppliers, factory, Gigabit Network Power 2 in 1 Surge Protector, Network Power 2 in 1 Surge Protector, Gigabit POE Network Lighting Protector, Network Power Data 3 in 1 Lighting Protector, 100M Network Lighting Protector, Gigabit Network Lighting Protector

Send Inquiry