Introduction
The HX-POE100E is a DIN-rail mountable/compact surge protection device designed to shield Fast Ethernet (10/100 Mbps) connections and Power over Ethernet (PoE) equipment from transient overvoltages, lightning strikes, and static discharge.
Product Specifications
|
Item |
Specification |
|
Surge Protection |
In: 2.5kA; Imax: 5kA (8/20μs) |
|
Operating Voltage |
48V DC, Uc: 57V DC |
|
Protection Lines |
Full 8-line Ethernet & PoE protection |
|
Network Speed |
10/100Mbps Fast Ethernet, insertion loss ≤0.5dB |
|
PoE Support |
IEEE 802.3af/at PoE+ (Mode A & B) |
|
Power Capacity |
Supports up to 1A continuous current |
|
Interface |
Shielded RJ45 input/output with grounding cable |
|
Housing Size |
78 × 25 × 25mm metal enclosure |
|
Installation |
Plug-and-play, installation within 3 minutes |
|
Mounting |
Inline, wall box, or DIN-rail installation options |
Key Performance
Sub-Nanosecond Protection (<1 ns): Clamps transient overvoltages instantly to prevent thermal breakdown of Ethernet PHY chips and IEEE 802.3af/at controllers.
Shielded Aluminum Enclosure: Isolates network signals from industrial EMI in high-voltage control cabinets.
Minimal Signal Loss (<0.5 dB): Maintains full 100 Mbps data throughput over 100-meter Cat5e/Cat6 runs without signal boosters.
DC Continuous Operation: Optimized PCB trace layout prevents localized heat buildup during maximum continuous PoE power delivery.
Customization & OEM Services
- Custom laser-etched logos, serial numbers, and RAL-specified anodized enclosure colors available for orders over 500 units.
- Configurable ground wire lengths, terminal ring sizes (M4/M6), and custom DIN-rail or rack-mount brackets.
- Tailored clamping voltages (Uc) designed for proprietary 12V, 24V, or legacy industrial DC networks.
- Custom RJ45 pin assignments to match non-standard PoE wiring or specialized industrial equipment.
Manufacturing Control
Thermal Burn-In: Every PCBA undergoes 8 hours of continuous full-load stress testing at 65°C to filter out early component failures.
Surge & Electrical Testing: Automated test stations verify clamping threshold, high-voltage impulse tolerance, and PoE continuity before sealing.
MES Batch Traceability: Serialized QR codes link every unit to its raw component batch records and factory test reports.
Supply Capability
Order Tiers: Standard MOQ is 100 units; custom OEM production runs start at 500 units.
Monthly Capacity: 150,000 units per month via automated assembly lines for large enterprise supply chains.
Lead Times: Evaluation samples ship within 48 hours; custom OEM prototypes ship in 10 to 14 business days.
Safety Stock: Factory retains 30-day buffer stock for critical GDT and TVS components.
Commercial Terms
Pay Terms: T/T bank transfer, L/C for volume orders, and Net 30 payment terms for qualified enterprise buyers.
Incoterms: Available under EXW, FOB Shenzhen, CIF, or DDP terms via courier, air, or sea freight.
Documentation: Certificate of Origin (CO), RoHS/CE test reports, and factory inspection certificates provided with every shipment.
2-Year Warranty: Backed by direct RMA service featuring 1:1 advance unit replacement for defect claims.
FAQ
Q: Is the 2-year warranty voided if the unit is installed in an unshielded outdoor enclosure?
A: Yes, the standard 2-year warranty applies to indoor or properly shielded installations only; outdoor or exposed-enclosure use requires an additional IP-rated housing.
Q: What international standard is the 2.5kA/5kA (8/20μs) surge protection rating tested against?
A: The surge rating is tested per IEC 61643-21, the standard governing surge protective devices for telecommunications and signaling networks.
Q: Does the unit maintain stable temperature under continuous 25.5W PoE+ load in enclosed DIN-rail cabinets?
A: Yes, thermal testing confirms the enclosure surface stays below 45°C under continuous 25.5W PoE+ load at 25°C ambient, with adequate passive heat dissipation through the aluminum housing.
Q: How is the sub-nanosecond (<1ns) response time actually measured and verified?
A: Response time is measured using a calibrated combination wave generator per IEC 61000-4-5.
Q: What happens if a batch fails clamping voltage or continuity testing after arrival at the destination port?
A: Buyers must submit a claim with test evidence within 15 days of port arrival, after which a credit note or free replacement is issued within 10 business days upon verification.
Hot Tags: 100m poe network lighting protector, China 100m poe network lighting protector manufacturers, suppliers, factory, Gigabit Network Power 2 in 1 Surge Protector, Network Power 2 in 1 Surge Protector, Gigabit POE Network Lighting Protector, Network Power Data 3 in 1 Lighting Protector, 100M Network Lighting Protector, Gigabit Network Lighting Protector
