4Mp USB 3.0 Camera with Type-C Port

The 4MP USB 3.0 Camera with Type-C Port is a high-resolution image acquisition module based on a CMOS sensor, enabling data transmission and power supply via a USB 3.0 Type-C interface. It is used in computer vision, image acquisition, and embedded systems to achieve high-bandwidth video data input.

High-bandwidth data transfer
Utilizing a USB 3.0 Type-C interface and supporting a 5.0Gbps transfer rate, high-resolution video data such as 2688×1520 @30fps can be transmitted through a single interface without the need for an additional compression link.

High dynamic range imaging
With a dynamic range greater than 100dB and a signal-to-noise ratio of 42dB, combined with a 2.9μm × 2.9μm pixel size, the sensor outputs more complete brightness level information in scenes with varying brightness.

Unified frame rate output across multiple resolutions
Supports 30fps output across multiple resolutions from 2688×1520 to 320×240, eliminating the need to adjust the system frame rate configuration when switching between different resolutions.

Low-power interface power supply
Powered via USB 5V±5% with a power consumption of approximately 0.95W, the device can be directly powered by the host interface without the need for an additional power supply module.

Machine Vision: Used in vision systems to acquire image data, providing input for detection or recognition algorithms.

Industrial Inspection: Used in inspection equipment to acquire images of the object under test for dimensional or appearance analysis.

Medical Imaging Equipment: Used in medical auxiliary equipment for image acquisition, enabling data recording or display.

Embedded Systems: Integrated into various embedded terminals as an image input module for system development.